HANWHA TNV-C8011RW

The Hanwha Vision TNV-C8011RW is an advanced 5 MP AI IR wall-mount panoramic network camera developed for locations requiring extremely wide coverage from a compact, tamper-resistant installation. It uses a 1/2.8-inch progressive 5 MP CMOS sensor and delivers up to 2592 × 1944 resolution at 30 fps, combined with a 1.6 mm F1.6 fixed lens providing approximately 175° horizontal, 125° vertical and 175° diagonal coverage. Low-light performance reaches approximately 0.038 lux in colour and 0.0038 lux in monochrome, while integrated IR provides visibility up to approximately 15 metres and enables operation at 0 lux when the IR LEDs are active. Imaging features include 120 dB WDR, BLC, SSDR, SSNR V, AI-based WiseNR II, lens-distortion correction and Hallway View. Its intelligent analytics can classify people, faces and vehicles, including cars, buses, trucks, motorcycles and bicycles, while supporting AI-assisted motion detection, object detection, virtual line crossing/direction, loitering, intrusion and entrance/exit events. Hanwha also supports business-intelligence functions including people counting, vehicle counting, queue management, heat mapping and occupancy monitoring, together with a built-in microphone, microSD edge storage, PoE and IP66 protection. VEGA Digital IT Solutions LLC, as a SIRA-approved CCTV/security solutions provider in Dubai and Hanwha Vision supplier and system integrator across the UAE, can deploy the TNV-C8011RW in reception areas, corridors, commercial premises, hospitals, retail environments and other locations where panoramic wall-mounted surveillance is required.The related Hanwha Vision TID-600R is a 2 MP network intercom and security camera designed for entrances, reception points, security help stations and access-control applications where two-way communication and visual verification are required. It uses a 1/2.8-inch 2 MP sensor and 1.6 mm fixed lens with approximately 180° horizontal and 114° vertical coverage, produces up to 1920 × 1080 video at 60 fps, and incorporates 150 dB WDR for difficult backlit entrance conditions. Integrated IR provides approximately 5 m visibility, while the built-in microphone and speaker deliver full-duplex audio with echo cancellation and noise reduction. A distinctive touchless call function allows users to initiate communication without physically pressing a button, while SIP 2.0 support enables integration with VoIP systems, PBX platforms and compatible security applications. Additional functions include a built-in tamper switch, relay output for door/access-control operation, microSD storage, PoE/12 VDC, ONVIF integration and intelligent events such as directional detection, motion detection, appear/disappear, entrance/exit, loitering, tampering, virtual line, audio detection, shock detection and sound classification. Its IP65, IK08 and NEMA 4X construction makes it suitable for protected indoor and outdoor entrance applications. The TID-600R therefore complements the TNV-C8011RW by adding intercom, door-control and SIP communication capabilities to a Hanwha Vision CCTV architecture. For system installation and SIRA-oriented deployment, VEGA Digital first performs a detailed security survey covering entrances, reception areas, corridors, help points, door-access locations, blind spots, lighting conditions, required identification coverage, mounting height, recording retention, network design, NVR/VMS sizing and UPS requirements. The TNV-C8011RW is normally wall-mounted where its ultra-wide 175° field of view can cover a complete entrance or circulation area with minimal blind spots; engineers then configure tilt within its available adjustment range, IR, WDR, WiseNR II, object classification, people counting, occupancy, queue analytics, heat maps, privacy masking, NTP synchronization and recording rules. The TID-600R is installed at an accessible entrance or help-point height and integrated with SIP phones/PBX, access controllers, electric locks or barriers through its relay and I/O interfaces, with touchless call, audio levels, echo cancellation and security analytics configured during commissioning. Both devices can be connected through managed PoE switches and dedicated CCTV/security VLANs to Hanwha Vision NVRs or compatible VMS platforms, followed by daytime/nighttime image testing, audio/intercom testing, access-control relay verification, recording/playback checks, network/UPS-failure testing and preparation of complete as-built documentation.