
HANWHA TNO-C8083E
5MP Compact Explosion-proof AI Camera
Key Features
AI Object Detection and Classification
1/2” cable gland type for easy installation
IECEx, ATEX, KCs, JPEx
LAN cable made from flame-retardant LSZH(Low Smoke Zero Halogen) material
Overview
The Hanwha Vision TNO-C8083E is a compact 5 MP AI explosion-proof network camera engineered for hazardous environments such as oil & gas facilities, refineries, petrochemical plants, pharmaceutical production, chemical processing areas and other locations where combustible gases or dust may be present. It uses a 1/2.8-inch CMOS sensor, delivers up to 2592 × 1944 at 30 fps, and features a 3.2–10.2 mm 3.2× motorized/varifocal optical system providing approximately 95°–29° horizontal coverage. Professional imaging includes 120 dB WDR, Day/Night ICR, WiseNR II AI noise reduction, SSNR V, lens-distortion correction and AI-preferred shutter control, while H.265/H.264/MJPEG and WiseStream III reduce bandwidth and storage demand. Its AI engine classifies people and vehicles, including vehicle type and colour attributes, and supports BestShot, object detection, virtual-line crossing/direction, loitering, intrusion, entrance/exit, motion detection, people counting, vehicle counting, queue management and heat maps. The compact STS316L stainless-steel housing weighs about 4.77 kg and carries IP66 and IK10 protection, together with explosion-protection certifications including IECEx, ATEX, KCs and JPEx, making it considerably easier to install than traditional large explosion-proof enclosures. VEGA Digital IT Solutions LLC, as a SIRA-approved CCTV/security solutions provider in Dubai and Hanwha Vision solution supplier and system integrator across the Middle East, can deploy the TNO-C8083E within professionally engineered hazardous-area surveillance solutions.The TNU-6324ER is a 2 MP explosion-proof IR positioning camera with a powerful 4.44–142.6 mm 32× optical zoom, up to 60 fps, 200 m IR, 120 dB WDR, 360° endless pan, 180° tilt, 300 presets, built-in wiper and 316L stainless-steel IP67/IK10 construction, with IECEx, ATEX and related hazardous-area certifications. The TNU-6324E provides the same 2 MP, 32× optical zoom, 360° endless pan/180° tilt, 120 dB WDR, 300 presets, stainless housing, wiper and IP67/IK10 protection, but without the integrated 200 m IR system, making it suitable where site lighting or separate illumination is available. The earlier TNU-6322E similarly provides 2 MP at up to 60 fps, 4.44–142.6 mm 32× zoom, 360° endless pan, 180° tilt, 120 dB WDR, WiseStream II, built-in wiper and explosion-proof stainless-steel construction, while the TNU-6322ER adds long-range IR up to approximately 200 m for low- and no-light applications. For fixed-direction hazardous-area monitoring, the TNO-6321E provides 2 MP resolution, up to 60 fps, 32× optical zoom, 120 dB WDR, digital image stabilization, defog, analytics and built-in wiper without the positioning mechanism of the TNU models. For system installation and SIRA-oriented deployment, VEGA Digital first performs a hazardous-area survey covering the applicable zone classification, required explosion-protection standard, mounting point, surveillance distance, lighting level, field of view, cable routing, earthing, network architecture, recording retention, VMS/NVR capacity and backup-power requirements. The compact TNO-C8083E can be mounted using approved explosion-proof installation methods and its integrated 1/2-inch cable-gland design, which simplifies cable entry while maintaining hazardous-area integrity; its varifocal lens is then adjusted to achieve the required identification or monitoring distance. For large industrial sites requiring active positioning, TNU-6324ER/TNU-6322ER are selected where 32× zoom and long-range 200 m IR are required, while TNU-6324E/TNU-6322E are appropriate where separate lighting is available. Engineers configure H.265, WiseStream, WDR, AI object classification, people/vehicle analytics, virtual lines and intrusion zones, PTZ presets and tours, NTP synchronization, event recording, privacy masking and cybersecurity, followed by day/night tests, zoom/focus verification, IR testing, pan/tilt and preset-accuracy checks, recording/playback and retention verification, network/UPS-failure testing and complete hazardous-area as-built documentation.
Related products
Interested in HANWHA TNO-C8083E?
Tell us about your project and we'll put together a free, no-obligation quote.
Let’s work together



